HOOD(for Hatchback, Wagon) REASSEMBLY

PROCEDURE

  1. INSTALL HOOD MOULDING CLIP

    1. B324714

      Engage the 2 claws and install the hood moulding clip.

  2. CONNECT WASHER HOSE ASSEMBLY

    1. B332346

      Engage the 6 clamps to connect the washer hose assembly.

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY

    Click here

  4. INSPECT WASHER NOZZLE SUB-ASSEMBLY

    Click here

  5. ADJUST WASHER NOZZLE SUB-ASSEMBLY

    Click here

  6. INSTALL HOOD TO RADIATOR SUPPORT SEAL (w/ Hood To Radiator Support Seal)

    1. B324712

      Engage the 6 hood to cowl top seal clips to install the hood to radiator support seal.

  7. INSTALL HOOD INSULATOR (w/ Hood Insulator)

    1. B332345

      Engage the guide.

    2. Install the hood insulator with 6 new hood insulator clips.

  8. INSTALL HOOD LOCK ASSEMBLY

    1. B332354

      Apply MP grease to the sliding areas of the lock.

    2. w/o Engine Hood Courtesy Switch:

      1. B332341

        Install the hood lock assembly with the 3 bolts.

        7.5 N*m

        76 kgf*cm

        66 in.*lbf

    3. w/ Engine Hood Courtesy Switch:

      1. B332350

        Install the hood lock assembly with the 3 bolts.

        7.5 N*m

        76 kgf*cm

        66 in.*lbf

      2. Connect the connector.

    4. for LHD:

      1. B332347

        Connect the hood lock control cable assembly.

    5. for RHD:

      1. B324723

        Connect the hood lock control cable assembly.

    6. w/ Bracket:

      1. B324717

        Engage the guide.

      2. Connect the No. 1 water hose clamp bracket with the 2 bolts.

        5.0 N*m

        51 kgf*cm

        44 in.*lbf

  9. ADJUST HOOD SUB-ASSEMBLY

    Click here