REAR SHOCK ABSORBER (for 4WD and Pre-Runner) DISPOSAL


  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY

    A01DZINE01

    1. Fully extend the shock absorber piston rod, and clamp it in a vise at an angle.

    2. Using a drill or similar tool, gradually make a hole in area A to discharge the gas inside of the absorber.

      CAUTION:

      As metal debris may be blown outward by the gas, you must:


      • Wear protective glasses.


      • Cover the area being cut.

      Note

      The gas is colorless, odorless and harmless.