AIRBAG SYSTEM(w/o Occupant Classification System), Diagnostic DTC:B1630/23,B1632/81,B1635/24 and B1637/82

DTC Code	DTC Name
B1630/23	Rear Airbag Sensor RH Circuit Malfunction
B1632/81	Lost Communication with Rear Airbag Sensor RH
B1635/24	Rear Airbag Sensor LH Circuit Malfunction
B1637/82	Lost Communication with Rear Airbag Sensor LH

DESCRIPTION

The rear airbag sensor LH or RH consists of a lateral deceleration sensor, etc.

If the airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1630/23, B1632/81, B1635/24 or B1637/82 is stored when a malfunction is detected in the rear airbag sensor LH or RH circuit.


DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B1630/23	Rear Airbag Sensor RH Circuit Malfunction	Either condition is met: A rear airbag sensor RH malfunction. A airbag sensor assembly malfunction.	Rear airbag sensor RH Airbag sensor assembly
B1632/81	Lost Communication with Rear Airbag Sensor RH	Either condition is met: A rear airbag sensor RH malfunction. A airbag sensor assembly malfunction.	Rear airbag sensor RH Airbag sensor assembly
B1635/24	Rear Airbag Sensor LH Circuit Malfunction	Either condition is met: A rear airbag sensor LH malfunction. A airbag sensor assembly malfunction.	Rear airbag sensor LH Airbag sensor assembly
B1637/82	Lost Communication with Rear Airbag Sensor LH	Either condition is met: A rear airbag sensor LH malfunction. A airbag sensor assembly malfunction.	Rear airbag sensor LH Airbag sensor assembly

WIRING DIAGRAM

CAUTION / NOTICE / HINT

Note:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Click here Click here Click here Click here Click here
When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
Click here Click here Click here Click here Click here Click here
After replacing the airbag sensor assembly, refer to initialization.
Click here Click here Click here Click here Click here Click here

PROCEDURE

CHECK DTC

Turn the ignition switch to ON.
Clear the DTCs stored in memory.
Click here

Body Electrical > SRS Airbag > Clear DTCs
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.

Check for DTCs.

Click here

Body Electrical > SRS Airbag > Trouble Codes

Result


Proceed to
DTC B1635/24 or B1637/82 is output
DTC B1630/23 or B1632/81 is output
DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

Tip:

Codes other than DTC B1630/23, B1632/81, B1635/24 and B1637/82 may be output at this time, but they are not related to this check.

DTC B1630/23 or B1632/81 is output

CHECK REAR AIRBAG SENSOR RHClick here

DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

USE SIMULATION METHOD TO CHECK

Click here

DTC B1635/24 or B1637/82 is output

CHECK REAR AIRBAG SENSOR LH

*1	Rear Airbag Sensor RH
*2	Airbag Sensor Assembly

Turn the ignition switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the rear airbag sensor LH with RH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory.
Click here

Body Electrical > SRS Airbag > Clear DTCs
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.

Check for DTCs.

Click here

Body Electrical > SRS Airbag > Trouble Codes

Result


Proceed to
DTC B1630/23 or B1632/81 is output
DTC B1635/24 or B1637/82 is output
DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

Tip:

Codes other than DTC B1630/23, B1632/81, B1635/24 and B1637/82 may be output at this time, but they are not related to this check.

Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Return the rear airbag sensor RH and LH to their original positions and connect the connectors to them.

DTC B1630/23 or B1632/81 is output

REPLACE REAR AIRBAG SENSOR LH

Click here Click here

DTC B1635/24 or B1637/82 is output

REPLACE AIR BAG SENSOR ASSEMBLY

Click here

DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

USE SIMULATION METHOD TO CHECK

Click here

CHECK REAR AIRBAG SENSOR RH

*1	Rear Airbag Sensor LH
*2	Airbag Sensor Assembly

Turn the ignition switch off.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the rear airbag sensor RH with LH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory.
Click here

Body Electrical > SRS Airbag > Clear DTCs
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.

Check for DTCs.

Click here

Body Electrical > SRS Airbag > Trouble Codes

Result


Proceed to
DTC B1635/24 or B1637/82 is output
DTC B1630/23 or B1632/81 is output
DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

Tip:

Codes other than DTC B1630/23, B1632/81, B1635/24 and B1637/82 may be output at this time, but they are not related to this check.

Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Return the rear airbag sensor LH and RH to their original positions and connect the connectors to them.

DTC B1635/24 or B1637/82 is output

REPLACE REAR AIRBAG SENSOR RH

Click here Click here

DTC B1630/23 or B1632/81 is output

REPLACE AIR BAG SENSOR ASSEMBLY

Click here

DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output

USE SIMULATION METHOD TO CHECK

Click here