FRONT SEAT CUSHION HEATER(for Power Seat) INSPECTION

Info Added 2018-01-24

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for Type A)


    1. Check the front seat cushion heater assembly LH.


      1. Measure the resistance according to the value(s) in the table below.

        B008BJZE03
        Text in Illustration
        *1 Connector A *2 Connector B (Gray Colored)
        *3 Connector C (Green Colored) *4 Connector D
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly LH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 (E) - B1 Always Below 1 Ω
        A2 (THL) - B2
        A3 (SWL) - B3
        A4 (B) - B4
        C4 - D2
        C1 - D1 20°C (68°F) 0.70 to 0.85 Ω
        C2 - C3 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly LH.

  2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for Type B)


    1. Check the front seat cushion heater assembly LH.


      1. Measure the resistance according to the value(s) in the table below.

        B008BJRC03
        *1 Connector A *2 Connector B
        *3 Connector C - -
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly LH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - B12 Always Below 1 Ω
        A2 - B4
        A3 - B3
        A4 - B8
        B7 - C2
        B1 - C1 20°C (68°F) 0.70 to 0.85 Ω
        B6 - B11 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly LH.

  3. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for Type A)


    1. Check the front seat cushion heater assembly RH.


      1. Measure the resistance according to the value(s) in the table below.

        B008BJZE04
        Text in Illustration
        *1 Connector A *2 Connector B (Gray Colored)
        *3 Connector C (Green Colored) *4 Connector D
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly RH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 (E) - B1 Always Below 1 Ω
        A2 (THR) - B2
        A3 (SWR) - B3
        A4 (B1) - B4
        C4 - D2
        C1 - D1 20°C (68°F) 0.70 to 0.85 Ω
        C2 - C3 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly RH.

  4. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for Type B)


    1. Check the front seat cushion heater assembly RH.


      1. Measure the resistance according to the value(s) in the table below.

        B008BJRC03
        *1 Connector A *2 Connector B
        *3 Connector C - -
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly RH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - B12 Always Below 1 Ω
        A2 - B4
        A3 - B3
        A4 - B8
        B7 - C2
        B1 - C1 20°C (68°F) 0.70 to 0.85 Ω
        B6 - B11 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly RH.