BLIND SPOT MONITOR SYSTEM TERMINALS OF ECU


  1. BLIND SPOT MONITOR SENSOR RH (MASTER)

    B0069HSE59

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    L56-4 (OMIR) - L56-10 (BRGD) G - LA Outer rear view mirror indicator RH power source Outer rear view mirror indicator RH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator RH blinking Alternating between 0 to 9.5 V
    Outer rear view mirror indicator RH not illuminated Below 1 V
    L56-5 (BRB) - L56-10 (BRGD) R - LA IG power source Engine switch off Below 1 V
    Engine switch on (IG)

    10.5 to 16 V*1

    11 to 14 V*2
    L56-10 (BRGD) - Body Ground LA - Body ground Ground Always Below 1 Ω

  2. BLIND SPOT MONITOR SENSOR LH (SLAVE)

    B0069HSE60

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    L57-3 (BUZ) - L57-10 (BLGD) GR - W-B RCTA buzzer (blind spot monitor buzzer) operation signal RCTA buzzer (blind spot monitor buzzer) not sounding 11 to 14 V
    RCTA buzzer (blind spot monitor buzzer) sounding Alternating between 0 to 14 V
    L57-4 (OMIL) - L57-10 (BLGD) G - W-B Outer rear view mirror indicator LH power source Outer rear view mirror indicator LH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator LH blinking Alternating between 0 to 9.5 V
    Outer rear view mirror indicator LH not illuminated Below 1 V
    L57-5 (BLB) - L57-10 (BLGD) R - W-B IG power source Engine switch off Below 1 V
    Engine switch on (IG)

    10.5 to 16 V*1

    11 to 14 V*2
    L57-10 (BLGD) - Body Ground W-B - Body ground Ground Always Below 1 Ω

    • *1: w/ Stop and Start System

    • *2: w/o Stop and Start System