FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT FOG LIGHT ASSEMBLY LH (w/o Cornering Light)

   
   
   1. 

      *a	Component without harness connected (Fog Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition Positive (+) → 1 (B) Negative (-) → 4 (E) Illuminates

      If the result is not as specified, replace the fog light assembly LH.

2. INSPECT FOG LIGHT ASSEMBLY RH (w/o Cornering Light)

   
   
   1. 

      *a	Component without harness connected (Fog Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition Positive (+) → 1 (B) Negative (-) → 4 (E) Illuminates

      If the result is not as specified, replace the fog light assembly RH.

3. INSPECT FOG LIGHT ASSEMBLY LH (w/ Cornering Light)

   
   
   1. 

      *a	Component without harness connected (Fog Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition Positive (+) → 2 (B) Negative (-) → 3 (CRPL) Negative (-) → 4 (E) A and B illuminates Positive (+) → 1 (B) Positive (+) → 2 (B) Negative (-) → 3 (CRPL) Negative (-) → 4 (E) A and B and C illuminates Positive (+) → 1 (B) Negative (-) → 4 (E) B and C illuminates

      If the result is not as specified, replace the fog light assembly LH.

4. INSPECT FOG LIGHT ASSEMBLY RH (w/ Cornering Light)

   
   
   1. 

      *a	Component without harness connected (Fog Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition Positive (+) → 2 (B) Negative (-) → 3 (CRPR) Negative (-) → 4 (E) A and B illuminates Positive (+) → 1 (B) Positive (+) → 2 (B) Negative (-) → 3 (CRPR) Negative (-) → 4 (E) A and B and C illuminates Positive (+) → 1 (B) Negative (-) → 4 (E) B and C illuminates

      If the result is not as specified, replace the fog light assembly RH.