TEMPERATURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL TEMPERATURE SWITCH

   1. Using a 19 mm union nut wrench, install a new temperature switch.

      7.4 N*m

      75 kgf*cm

      65 in.*lbf

      Note:

      Do not apply any excessive force to the pipe when installing the temperature switch.

   2. Connect the temperature switch connector.

2. INSTALL NO. 1 ENGINE COVER

   Click here

3. ADD ENGINE COOLANT

   Click here

4. INSPECT FOR COOLANT LEAK

   Click here

5. INSTALL NO. 1 ENGINE UNDER COVER

   Click here