ROOM TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE

  1. INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR

    1. Connect the connector and aspirator pipe to the cooler (room temperature sensor) thermistor.

    2. Attach the 2 claws to install the cooler (room temperature sensor) thermistor.

  2. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio, for Radio Receiver Type)

    Click here

  6. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio, for Radio and Display Type)

    Click here

  7. INSTALL STEREO OPENING COVER (w/o Audio)

    Click here

  8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  9. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  10. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here