BACK-UP LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE REAR BUMPER COVER

    (Click here)

  2. REMOVE BACK UP LIGHT ASSEMBLY LH

    1. E283352

      w/o Rear Fog Light:

      1. Disconnect the connector and detach the clamp.

      2. Remove the 2 bolts.

      3. Detach the 2 claws and remove the back up light assembly LH.

    2. E283373

      w/ Rear Fog Light:

      1. Disconnect the 2 connectors and detach the clamp.

      2. Remove the 2 bolts.

      3. Detach the 2 claws and remove the back up light assembly LH.