CANVAS TOP DRIVE MOTOR INSTALLATION

PROCEDURE

1. INSTALL SLIDE ROOF MOTOR ASSEMBLY

   1. Clean the bolt hole on the canvas top panel.

   2. Clean the bolt threads of the bolt.

   3. Apply adhesive to the threads of the bolt.

      Adhesive

      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

   4. Using a T25 "TORX" socket wrench, install the slide roof motor assembly with the 3 screws.

      5.0 N*m

      51 kgf*cm

      44 in.*lbf

2. INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)

   Click hereClick here

3. INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)

   Click here

4. RESET SLIDE ROOF MOTOR ASSEMBLY

   Click here

5. CHECK SLIDING ROOF SYSTEM

   Click here