TIRE PRESSURE WARNING SYSTEM, Diagnostic DTC:C1475

DTC Code DTC Name
C1475 TPMS System Malfunction

DESCRIPTION

The tire pressure warning ECU is integrated into the skid control ECU (brake actuator assembly). If the tire pressure warning system is malfunctioning, the skid control ECU (brake actuator assembly) will store this DTC.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C1475

TPMS System Malfunction

Read/write malfunction of tire pressure warning ECU

Tire pressure warning ECU

-

CAUTION / NOTICE / HINT

Note:

When replacing the skid control ECU (brake actuator assembly), perform VSC system variant learning, acceleration sensor zero point calibration and tire pressure warning system initialization.

VSC system:Click here

Tire pressure warning system:Click here

PROCEDURE

  1. CHECK DTC OUTPUT (C1475)

    1. Clear the DTCs.

      Click here

      Chassis > ABS/VSC/TRC > Clear DTCs

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ON and check for DTCs.

      Click here

      Chassis > ABS/VSC/TRC > Trouble Codes

      OK

      DTC C1475 is not output.

    Result

    Proceed to

    OK

    NG
    OK

    END

    NG

    REPLACE BRAKE ACTUATOR ASSEMBLY

    Click here