BACK DOOR THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Back Door Hinge Installation Hole φ16 (0.63)
B, b Back Door Stay Installation Nut M6 (0.24)
C, c Quarter Panel Standard Hole φ13 (0.51)
D, d Roof Side Inner Rear Panel/Quarter Panel Rear Lower Extension Adjoining Portion -
E, e Quarter Panel Rear Lower Extension/Body Lower Back Panel Reinforcement Adjoining Portion -
F, f Back Door Lock Striker Installation Nut M6 (0.24)
G, g Rear Shock Absorber Installation Hole φ25 (0.98)
H,h Rear Absorber Mounting Bracket Standard Hole φ10 (0.39)
J, j Center Body Pillar Assembly Mark -
A0050I5E01
*1 Distance between points other than those above
*2 mm
*3 (in.)