МАСЛЯНЫЙ НАСОС РАЗБОРКА

PROCEDURE


  1. REMOVE STATOR SHAFT O-RING


    1. B003S1L

      Remove the stator shaft O-ring from the oil pump assembly.

  2. SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. B003R11C02
      *1 Torque Converter Assembly

      Place the oil pump assembly on the torque converter assembly.

  3. REMOVE CLUTCH DRUM OIL SEAL RING


    1. B003PPRN01

      Remove the 3 clutch drum oil seal rings.

  4. REMOVE STATOR SHAFT ASSEMBLY


    1. B003JQ7

      Using a T30 "TORX" socket wrench, remove the 14 screws and the stator shaft assembly.

  5. REMOVE FRONT OIL PUMP BODY O-RING


    1. B003NKR

      Remove the front oil pump body O-ring from the front oil pump body sub-assembly.

    2. Remove the front oil pump body sub-assembly from the torque converter assembly.

  6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here

  7. INSPECT STATOR SHAFT ASSEMBLY

    Click here

  8. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY

    Click here

  9. REMOVE FRONT OIL PUMP DRIVE GEAR


    1. B003OQT

      Remove the front oil pump drive gear.

  10. REMOVE FRONT OIL PUMP DRIVEN GEAR


    1. B003LU2

      Remove the front oil pump driven gear.

  11. REMOVE FRONT OIL PUMP OIL SEAL


    1. B003KCTC01
      *a Protective Tape

      Using a screwdriver, remove the front oil pump oil seal.

      Note

      Be careful not to damage the front oil pump oil seal and front oil pump body sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.