DIFFERENTIAL PRESSURE SENSOR INSTALLATION


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR


    1. B007VJOE01
      Text in Illustration
      *a Paint Mark

      Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.

      Tech Tips

      Make sure the paint mark of the air hose side the differential pressure sensor.

    2. Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure the 2 hoses.

    3. Install the differential pressure sensor to the pipe clamp with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Connect the connector to the differential pressure sensor.

  2. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Install the engine service hole sub cover sub-assembly with the 5 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    2. Return the floor carpet to its original position.

  3. INSTALL FRONT DOOR SCUFF PLATE RH

  4. INSTALL FRONT SEAT ASSEMBLY RH


    1. B007OW8

      Connect the front seat inner belt assembly connector and install the front seat assembly.

    2. Align the front seat assembly adjuster pin with the holes in the body.

    3. Move the front seat assembly to the rearmost position.

      Note

      Make sure that the front seat assembly is securely locked.

    4. Temporarily tighten the 2 bolts on the front side of the front seat assembly.

    5. Move the front seat assembly fully forward.

      Note

      Make sure that the front seat assembly is securely locked.

    6. Temporarily tighten the 2 bolts on the rear side of the front seat assembly.

    7. Move the front seat assembly to the rearmost position.

      Note

      Make sure that the front seat assembly is securely locked.

    8. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of outer and inner side.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    9. Move the front seat assembly fully forward.

      Note

      Make sure that the front seat assembly is securely locked.

    10. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of outer and inner side.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

  5. INSTALL SEAT TRACK COVER LH


    1. B007Q5Y

      Attach the claw and install a new seat track cover LH with a new clip.