SFI SYSTEM(for Rear Heated Oxygen Sensor) PRECAUTION

Note

• Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).

• Before replacing the ECM, store the heavy knock history. After replacement, write the heavy knock history to the new ECM.

  Click here

• Initialize the heavy knock history after replacing the piston rings.

  Click here

• Perform Registration (VIN registration or frame number registration) when replacing the ECM.

  Click here

• Perform Registration (Switch Battery Type) when replacing the ECM.

  Click here

• Make sure to perform Reset Memory (A/T initialization), when replacing the automatic transaxle assembly, ECM or engine assembly.

  for 2WD: Click here

  for AWD: Click here

• When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

  System Name	See Procedure
  LKA/LDA System	Click here
  Stop and Start System
  Intelligent Clearance Sonar System
  Parking Assist Monitor System (w/ Parallel Parking Assist Function)
  Parking Assist Monitor System (w/o Parallel Parking Assist Function)
  Panoramic View Monitor System
  Power Door Lock Control System
  Pre-Crash Safety System
  Power Back Door System
  Lighting System (EXT)
  Adaptive High Beam System