СТАРТЕР (для моделей мощностью 1,4 кВт) УСТАНОВКА


  1. INSTALL STARTER ASSEMBLY


    1. A01DWYE

      Install the starter with the 2 bolts.

      Torque:
      58 N*m  { 591 kgf*cm, 43 ft.*lbf }
    2. A01E22B

      Connect the starter wire with the nut

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect the terminal cap.

    4. Connect the starter connector.

    5. Connect the ground wire with the bolt

      Torque:
      20 N*m  { 202 kgf*cm, 15 ft.*lbf }

  2. INSTALL FRONT FENDER SEAL


    1. Install the seal with the 5 clips.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.