WINDOW DEFOGGER SWITCH (for Automatic Cooler System) INSPECTION


  1. INSPECT NO. 1 COOLER WIRE


    1. Measure the resistance according to the value(s) in the table below.

      A01E1OIE01
      Standard Resistance
      Tester Connection Condition Specified Condition
      A1-B1 Always Below 1 Ω
      A2-B2 Always Below 1 Ω
      A3-B3 Always Below 1 Ω
      A4-B4 Always Below 1 Ω
      A5-B5 Always Below 1 Ω
      A6-B6 Always Below 1 Ω
      A7-B7 Always Below 1 Ω
      A8-B8 Always Below 1 Ω
      A9-B9 Always Below 1 Ω
      A10-B10 Always Below 1 Ω
      A11-B11 Always Below 1 Ω
      A12-B12 Always Below 1 Ω
      A13-B13 Always Below 1 Ω
      A14-B14 Always Below 1 Ω
      A15-B15 Always Below 1 Ω

      If the result is not as specified, replace the No. 1 cooler wire.