BATTERY CURRENT SENSOR REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick here

  2. REMOVE GENERATOR CONTROL ECU ASSEMBLY

    1. A354462

      Remove the nut and disconnect the engine wire from the generator control ECU assembly.

      Note:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click hereClick hereClick here

    2. A354463

      Remove the nut and disconnect the generator control ECU assembly from the battery.

    3. A354464

      Disconnect the generator control ECU assembly connector.