REAR BRAKE REASSEMBLY

PROCEDURE


  1. TEMPORARILY TIGHTEN REAR DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the rear disc brake bleeder plug after bleeding any air left in the system.

  2. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A005CTX

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

      Text in Illustration
      A005CWR Lithium Soap Base Glycol Grease

    2. Install the piston seal to the rear disc brake cylinder.

      Note

      Securely install the piston seal to the groove of the rear disc brake cylinder.

  4. INSTALL REAR DISC BRAKE PISTON


    1. A005DFOE01
      Text in Illustration
      *1 Cylinder Boot
      *2 Rear Disc Brake Piston
      A005CWR Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

    2. Install the cylinder boot to the rear disc brake piston.

    3. Apply a light layer of lithium soap base glycol grease to the contact surface of the rear disc brake piston, and install it to the rear disc brake cylinder.

      Note

      Do not install the rear disc brake piston forcibly in the rear disc brake cylinder.

  5. INSTALL CYLINDER BOOT


    1. A005AB0

      Install the cylinder boot to the rear disc brake cylinder.

      Note


      • Securely install the cylinder boot to the groove of the disc brake cylinder.

      • Do not damage the cylinder boot.