CAMERA HEATER INSTALLATION

PROCEDURE


  1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

    Note

    Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.

    B005TCA

    1. B005U0OC03
      B006DHE Install in this Direction (1)
      B006B42 Install in this Direction (2)
      B006GBM Heater Area

      Attach the guide in the direction indicated by the arrow (1) in the illustration.

    2. Attach the claw in the direction indicated by the arrow (2) in the illustration.

      Note

      Do not press the heater area.

    3. B005V9XC03
      *a Wire Harness

      Attach the guide to install the wire harness to the forward recognition bracket as shown in the illustration.

    4. B005SWA

      Attach the connector clamp to install the forward recognition with heater hood sub-assembly.

    5. B005VHI

      Connect the connector.

  2. INSTALL FORWARD RECOGNITION CAMERA

    Click here