FRAME AUXILIARY CROSSMEMBER ASSEMBLY REPLACEMENT

A01KXOE

A01KY3C

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the RH side.


  1. REMOVAL

    Symbol Meaning
    A01KY1U Cut with Disc Sander etc.
    A01KY2ZC01
    *A FRONT *B UPPER
    *C LH - -

  2. INSTALLATION

    Symbol Meaning
    A01KXZ1 Fillet Weld

    1. Make sure that proper welding can be performed by setting up the welding conditions as necessary before performing work.

    2. To prevent heat deformation, weld the right and left side of each part before continuing to the next part.

    3. Make sure that the welding bead at A is overlapped.

      A01KY5OC01
      *A FRONT *B UPPER
      *C LH - -
      *1 FRAME AUXILIARY CROSSMEMBER SUB-ASSEMBLY - -
      *a 311 mm (12.24 in.) - -

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.