LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY


    1. B004HD3C03
      *a

      Component without harness connected

      (Luggage Compartment Door Opening Switch Assembly)

      Check the switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 5 Pressed (ON) Below 25 Ω
        2 - 5 Not pressed (OFF) 1 MΩ or higher

        If the result is not as specified, replace the luggage compartment door opening switch assembly.

    2. Check the switch illumination.


      1. Apply battery voltage to the switch connector and check that the luggage compartment door opening switch assembly illuminates.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → Terminal 6

        Battery negative (-) → Terminal 1

        		 Illumination illuminates

        If the result is not as specified, replace the luggage compartment door opening switch assembly.