BACK DOOR SPEAKER INSTALLATION

PROCEDURE

1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY

   Note

   Do not touch the cone of the speaker.

   
   

   1. 

      Temporarily install the speaker by attaching the clip of the speaker to the back door panel.

   2. Install the rear speaker assembly with the 4 bolts.

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

      Note

      Pay attention when installing the bolts, as the bolt labeled 1 has a different length from the other 3 bolts.

      Torque:

      BOLT 1

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the connector.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL BACK DOOR LOCK COVER (w/o Power Back Door)

   Click here

4. INSTALL BACK DOOR LOCK COVER (w/ Power Back Door)

   Click here

5. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)

   Click here

6. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)

   Click here

7. INSTALL PULL HANDLE (w/ Power Back Door)

   Click here

8. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)

   Click here

9. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

10. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

11. INSTALL BACK DOOR CENTER GARNISH

    Click here