REAR POWER WINDOW SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    1. B222649

      Using moulding remover A, detach the 4 claws.

    2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

    1. B216945

      Detach the 2 claws and remove the regulator switch.