GENERATOR(for 150 A Type) INSTALLATION

PROCEDURE

1. INSTALL GENERATOR ASSEMBLY

   1. Install the generator assembly with the 2 bolts.

      52 N*m

      530 kgf*cm

      38 ft.*lbf

   2. Install the wire harness clamp bracket with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   3. Connect the generator wire with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   4. Install the terminal cap.

   5. Connect the generator connector.

2. INSTALL WIRE HARNESS CLAMP BRACKET

   1. Install the wire harness clamp bracket with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   2. Attach the wire harness clamp to the wire harness clamp bracket.

3. INSTALL FAN AND GENERATOR V BELT

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here