IGNITION KEY CYLINDER LIGHT REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    A01DYUR

    1. Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.

  2. REMOVE STEERING COLUMN COVER LOWER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  3. REMOVE STEERING COLUMN COVER UPPER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  4. REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System)


    1. A01E0RS

      Using a screwdriver, detach the claw transponder key amplifier in the direction indicated by the arrow in the illustration and remove it.

    2. Disconnect the connector.

  5. REMOVE KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System)


    1. A01E10T

      Using a screwdriver, detach the claw key cylinder light assembly in the direction indicated by the arrow in the illustration and remove it.

    2. Disconnect the connector.