REAR SHOCK ABSORBER (for 2WD) INSTALLATION


  1. INSTALL REAR SHOCK ABSORBER ASSEMBLY

    A01DW8AE03

    1. Install the 2 washers to the axle housing.

    2. Install 4 new bushes to the absorber.

    3. Install the absorber (with the 4 bushes) to the U bolt seat and frame.

    4. Install the 2 washers.

    5. Temporarily tighten the 2 bolts.

  2. INSTALL REAR WHEEL


    1. Install the wheel.

      Torque:
      152 N*m  { 1,550 kgf*cm, 112 ft.*lbf, for steel wheel }
      121 N*m  { 1,234 kgf*cm, 89 ft.*lbf, for aluminum wheel }

  3. STABILIZE SUSPENSION


    1. Lower the vehicle.

    2. Bounce the vehicle up and down several times to stabilize the suspension.

  4. TIGHTEN REAR SHOCK ABSORBER BOLT


    1. Tighten the 2 bolts.

      Torque:
      105 N*m  { 1,070 kgf*cm, 77 ft.*lbf }