FUEL PUMP(for Long Wheelbase) REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE


  1. INSTALL FUEL PUMP

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pump.

    Click here


    1. A01LE4D

      Install the fuel pump harness and connect the fuel pump connector.

    2. Apply a light coat of gasoline to a new O-ring.

    3. A01LBRKC01
      *1 O-Ring
      *2 Spacer
      *a Supporter

      Install the O-ring and spacer to the supporter of the fuel pump as shown in the illustration.

    4. A01L8WN

      Attach the 3 claws to the claw holes and connect the fuel pump.

  2. INSTALL NO. 1 FUEL SUB-TANK


    1. A01L893

      Attach the 2 claws to the claw holes and install the No. 1 fuel sub-tank.

    2. A01LBMU

      Attach the 3 claws to the claw holes.

    3. A01L8YJ

      Connect the fuel tube and wire harness.

    4. A01LBI1

      Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the No. 1 fuel sub-tank.

    5. A01LCUO

      Connect the fuel pump connector and wire harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here