DIESEL THROTTLE BODY INSPECTION


  1. INSPECT VENTURI ASSEMBLY


    1. Resistance inspection. (Throttle control motor)


      1. B007UY1

        Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard resistance
        Terminals Temperature Resistance
        2 - 1, 3 at 20°C (68°F) 18 to 22 Ω
        5 - 4, 6 at 20°C (68°F) 18 to 22 Ω

    2. Continuity inspection. (Throttle valve switch)


      1. B007QHP

        Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard resistance
        Throttle valve Resistance
        Fully open Below 1 Ω
        Fully close 10 KΩ or higher