STARTER (for 2.0 kW Type) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT FENDER SEAL


    1. Remove the 5 clips and seal.

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

    A01E1IKE01

    1. Remove the 2 bolts and disconnect the release cylinder.

  4. REMOVE STARTER ASSEMBLY


    1. A01DYLE

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. A01DXY7

      Remove the nut, bolt, and disconnect the ground cable.

    4. Remove the starter.