REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY

    1. Using a T45 "TORX" socket wrench, install the inner belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

  2. INSTALL REAR SEAT CUSHION LOWER HINGE COVER LH

    Click here

  3. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    1. Install the rear No. 2 seat assembly LH (Click here).