ENGINE IMMOBILISER SYSTEM(w/o Entry and Start System) DTC CHECK / CLEAR

  1. CHECK FOR IMMOBILISER DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Immobiliser / DTC.

    5. Check DTCs.

      Tip:

      • When using the intelligent tester with the ignition switch off to troubleshoot: Connect the intelligent tester to the vehicle, and turn the front door courtesy light switch LH (for LHD) or RH (for RHD) on and off at 1.5 second intervals until communication between the tester and vehicle begins.

      • Refer to the intelligent tester operator's manual for further details.

  2. CHECK FOR ECM DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT / DTC.

    5. Check DTCs.

  3. CLEAR IMMOBILISER DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Immobiliser / DTC.

    5. Clear the DTCs.

      Tip:

      • When using the intelligent tester with the ignition switch off to troubleshoot: Connect the intelligent tester to the vehicle, and turn the front door courtesy light switch LH (for LHD) or RH (for RHD) on and off at 1.5 second intervals until communication between the tester and vehicle begins.

      • Refer to the intelligent tester operator's manual for further details.

  4. CLEAR ECM DTC

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT / DTC.

    5. Clear the DTCs.