FRONT BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

PROCEDURE


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect each connector.

    2. B005YWX

      Install the front bumper assembly as shown in the illustration.

    3. B005ZEG

      Engage the 2 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the 3 clips and 4 bolts.

    5. Install the 6 screws.

    6. Install the front bumper assembly with the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. w/ Pre-collision System:


      1. Connect the connector.

  2. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Engage the 3 guides.

    2. Install the radiator support opening cover with the 3 clips.

  3. ADJUST FOG LIGHT ASSEMBLY

    Click here