DYNAMIC RADAR CRUISE CONTROL SYSTEM OPERATION CHECK


  1. INPUT SIGNAL CHECK

    A005D6TE02
    Text in Illustration
    *a ON/OFF
    *b -/SET
    *c +/RES

    1. Connect the GTS to the DLC3.

    2. Check the cruise control switch using the Data List function of the GTS (ON-OFF, -/SET and +/RES).

  2. INSPECT MODE SWITCH

    A005E61E01
    Text in Illustration
    *a ON/OFF
    *b MODE

    1. Turn the power switch on (IG).

    2. Turn the cruise control system on using the cruise control switch (ON-OFF button). Then push the cruise control switch to MODE for 1 second or more to change to the constant speed control mode.

    3. A005DMWE01
      Text in Illustration
      *1

      Cruise Control Indicator Light

      (Vehicle-to-vehicle distance control mode)
      *2

      Cruise Control Indicator Light

      (Constant speed control mode)

      Check that the cruise control indicator light (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator light (constant speed control mode) illuminates in green.

      Note

      Do not push any other switches before pushing the cruise control switch to MODE. If another switch is pushed, turn the cruise control system off and repeat the procedure above.

      Tech Tips

      If a malfunction is detected, turn the power switch off and repeat the procedure above.

  3. INSPECT STEERING PAD SWITCH ASSEMBLY


    1. Turn the power switch on (IG).

    2. Turn the cruise control system on using the cruise control switch (ON-OFF button).

    3. Press the vehicle-to-vehicle distance control switch of the steering pad switch.

    4. Check that the indication of the vehicle-to-vehicle distance, which is shown on the combination meter display, changes from long to middle to short in that order.

      A005DC1E01
      Text in Illustration
      *1 Distance Control Switch *2 Combination Meter Display
      *3 Long *4 Middle
      *5 Short - -

      Tech Tips

      Long is automatically selected each time the hybrid system is started.