CLIMATE CONTROL SEAT SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE CLIMATE CONTROL SEAT SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Air Conditioner.

      5. Select the setting by referring to the table below.

         
         Air Conditioner

         Tester Display	Description	Default	Setting	ECU
         Seat Blast Mode Setting	Function to decrease the airflow volume of the seat blower in each mode	100:Standard	100:Standard,010:Silent (Wind Amount Hi),001:Silent (Wind Amount Low)	Air conditioning amplifier assembly

      6. Enter the following menus: Customize Setting / Seat.

      7. Select the setting by referring to the table below.

         
         Seat

         Tester Display	Description	Default	Setting	ECU
         FL Seat A/C and Heater Sensitivity Adjust	Function to change sensitivity of the seat heater system.	0	10000:-2,01000:-1,00100:0,00010:+1,00001:+2	Air conditioning amplifier assembly
         FR Seat A/C and Heater Sensitivity Adjust	Function to change sensitivity of the seat heater system.	0	10000:-2,01000:-1,00100:0,00010:+1,00001:+2	Air conditioning amplifier assembly
         RL Seat A/C and Heater Sensitivity Adjust	Function to change sensitivity of the seat heater system.	0	10000:-2,01000:-1,00100:0,00010:+1,00001:+2	Air conditioning amplifier assembly
         RR Seat A/C and Heater Sensitivity Adjust	Function to change sensitivity of the seat heater system.	0	10000:-2,01000:-1,00100:0,00010:+1,00001:+2	Air conditioning amplifier assembly

   2. Customizing with the Multi-display

      
      

      1. Turn the engine switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Climate Settings.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         FR L seat temp. auto ctrl. mode	0	Function to change sensitivity of the seat heater system.	-2 / -1 / 0 / +1 / +2	Air conditioning amplifier assembly
         FR R seat temp. auto ctrl. mode	0	Function to change sensitivity of the seat heater system.	-2 / -1 / 0 / +1 / +2	Air conditioning amplifier assembly
         RR L seat temp. auto ctrl. mode	0	Function to change sensitivity of the seat heater system.	-2 / -1 / 0 / +1 / +2	Air conditioning amplifier assembly
         RR R seat temp. auto ctrl. mode	0	Function to change sensitivity of the seat heater system.	-2 / -1 / 0 / +1 / +2	Air conditioning amplifier assembly