FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made) REMOVAL

PROCEDURE


  1. INSTALL NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Cover)

  2. REMOVE PROPELLER SHAFT GUARD


    1. A01SIBL

      Remove the 2 bolts and propeller shaft guard.

    2. A01WBMI

      Remove the 2 bolts and propeller shaft guard bracket LH.

      Tech Tips


      • Perform this procedure only when replacement of the propeller shaft guard bracket is necessary.

      • Use the same procedure for the RH and LH sides.

  3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    1. A01SHPWC01
      *a Matchmark

      Place matchmarks on the propeller shaft flange and transfer flange.

    2. Remove the 4 nuts and 4 washers.

    3. A01SGLBC01
      *a Matchmark

      Place matchmarks on the propeller shaft flange and differential flange.

    4. Remove the 4 bolts, 4 nuts and 4 washers.

    5. Remove the front propeller shaft assembly.