VANITY LIGHT INSPECTION

PROCEDURE

  1. INSPECT VANITY LIGHT ASSEMBLY

    1. E122035C06

      *a

      Component without harness connected

      (Vanity Light Assembly)

      Inspect the vanity light.

      1. Apply battery voltage to each terminal of vanity light assembly connector and check the operation of the vanity light.

        Result

        Connection

        Condition

        Specified Condition

        Battery positive (+) → 2 (B)

        Battery negative (-) → 1 (E)

        Vanity light switch on

        Vanity light comes on

        Vanity light switch off

        Vanity light does not come on

        If the result is not as specified, replace the bulb or vanity light assembly.