OIL LEVEL SENSOR REMOVAL


  1. REMOVE NO. 2 ENGINE UNDER COVER


    1. B007W5X

      Remove the 6 bolts and No. 2 engine under cover.

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap sub-assembly.

    2. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

    3. Clean and install a new gasket and the oil pan drain plug.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the engine oil level sensor connector.

    2. B007TS3

      Remove the 4 bolts and engine oil level sensor from the oil pan sub-assembly.