ENGINE UNIT


  1. CONSTRUCTION


    1. The No. 1 oil pan is made of aluminum alloy.

    2. The No. 2 oil pan is made of steel.

    3. An oil passage has been integrated into the No. 1 oil pan to simplify the construction of the oil strainer.

    4. The No. 1 oil pan is secured to the cylinder block and transmission in order to increase rigidity.

      A01KXHLC01
      *1 Oil Pan Sub-assembly *2 No. 2 Oil Pan Sub-assembly
      *3 Oil Strainer Sub-assembly - -
      *a A - A Cross Section - -
      B0020NM Oil Passage - -