FRONT SPEED SENSOR(for 2WD) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

    Click here

  2. REMOVE FRONT SPEED SENSOR LH


    1. A01LFNR

      Disconnect the connector and detach the clamp.

    2. Detach the 2 clamps.

    3. A01LDX8

      Detach the clamp.

    4. Remove the bolt and harness clamp.

    5. B0068CM

      Remove the bolt and harness clamp from the front absorber bracket.

    6. Remove the bolt and harness clamp from the front lower arm bracket.

    7. B0069A0

      Remove the bolt and harness clamp.

    8. Remove the bolt and front speed sensor LH.

      Note

      Keep the sensor tip and sensor installation hole free from foreign matter.