ОХЛАДИТЕЛЬ ТОПЛИВА УСТАНОВКА


  1. INSTALL FUEL COOLER


    1. B007WA3E01

      Install the fuel cooler with the 3 bolts.

      Torque:
      18 N*m  { 180 kgf*cm, 13 ft.*lbf }
    2. B007VGIE01

      Install the 2 fuel hoses to the fuel cooler.

  2. CHECK FOR FUEL LEAKS


    1. PERFORM ACTIVE TEST


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch on.

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Engine and ECT / Active Test.

      5. Perform the Active Test.

        Tester Display Test Details Control Range Diagnostic Notes
        Test the Fuel Leak Pressurizes common rail internal fuel pressure, and checks for fuel leaks Stop/Start

        • Fuel pressure inside common rail pressurized to specified value and engine speed increased to 2,000 rpm when ON is selected

        • Above conditions preserved while test is ON