PRE-COLLISION SYSTEM WARNING BUZZER(for RHD) INSTALLATION

PROCEDURE

1. INSTALL PRE-COLLISION CITY BUZZER

   
   

   1. 

      Connect the connector.

   2. Engage the clamp to install the pre-collision city buzzer.

      Note

      If the pre-collision city buzzer has been struck or dropped, replace it with a new one.

      Tech Tips

      Make sure to install the pre-collision city buzzer in the correct direction.

2. INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

   Click here

3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

   Click here

4. INSTALL STEREO OPENING COVER WITH BRACKET (w/ Cover)

   Click here

5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   Click here

6. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

   Click here