HOOD ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HOOD SUB-ASSEMBLY

    1. Check that the clearance measurements of areas "a" through "e" are within each standard range.

      B332352N01
      Table 1. Standard Clearance

      Area

      Measurement

      Area

      Measurement

      a

      2.85 to 6.85 mm (0.112 to 0.270 in.)

      b

      -1.2 to 2.8 mm (-0.0472 to 0.110 in.)

      c

      4.85 to 8.85 mm (0.191 to 0.348 in.)

      d

      2.0 to 5.0 mm (0.0787 to 0.197 in.)

      e

      -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

      -

      -