CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR (w/ Glow Plug Controller)

   1. 

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note:

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

   2. Install the camshaft position sensor to the timing chain cover assembly with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

      Note:

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

   3. Connect the camshaft position sensor connector.

2. INSTALL CAMSHAFT POSITION SENSOR (w/o Glow Plug Controller)

   1. 

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note:

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

   2. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

      Note:

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

   3. Connect the camshaft position sensor connector.

3. INSTALL SENSOR BRACKET (w/o Glow Plug Controller)

   1. Install the sensor bracket to the cylinder head cover sub-assembly with the nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

4. INSPECT FOR OIL LEAK

   Click here

5. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   • w/ Glow Plug Controller:

     Click here

   • w/o Glow Plug Controller:

     Click here