QUARTER WINDOW GLASS REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click hereClick here

2. REMOVE NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

   Click hereClick here

3. REMOVE NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

   Click hereClick here

4. REMOVE FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

   Click hereClick here

5. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

   Click hereClick here

6. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

   Click hereClick here

7. REMOVE DECK FLOOR BOX LH (w/o Rear No. 2 Seat)

   Click hereClick here

8. REMOVE DECK FLOOR BOX RH (w/o Rear No. 2 Seat)

   Click hereClick here

9. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat, w/ Spare Tire)

   Click hereClick here

10. REMOVE DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    Click hereClick here

11. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    Click hereClick here

12. REMOVE DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    Click hereClick here

13. REMOVE DECK FLOOR BOX LH (w/ Rear No. 2 Seat)

    Click hereClick here

14. REMOVE DECK FLOOR BOX RH (w/ Rear No. 2 Seat)

    Click hereClick here

15. REMOVE DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    Click hereClick here

16. REMOVE DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Click hereClick here

17. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Click here

18. REMOVE REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)

    Click here

19. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

20. REMOVE REAR DECK TRIM COVER

    Click hereClick here

21. REMOVE REAR DOOR SCUFF PLATE LH

    Click hereClick here

22. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick here

23. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click hereClick here

24. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Click hereClick here

25. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click hereClick here

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click hereClick here

27. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click hereClick here

28. REMOVE QUARTER WINDOW ASSEMBLY LH

    

    Tip:

    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    Table 1. Text in Illustration

    *1	Protective Tape

    Note:

    When separating the quarter window from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.

    1. Disconnect the connectors.

    2. Using a knife, cut off the moulding as shown in the illustration.

       

       Table 2. Text in Illustration

       *1

       Cut

       -

       -

       Note:

       Be careful not to damage the vehicle body.

    3. 

       From the interior, insert a piano wire between the vehicle body and quarter window as shown in the illustration.

    4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    5. Cut through the adhesive by pulling the piano wire around the quarter window.

       Note:

       Leave as much adhesive on the vehicle body as possible when removing the quarter window.

    6. Detach the 2 clips and remove the quarter window.

       Table 3. Text in Illustration

       *1	Piano Wire
       *2	Spacer

29. REMOVE QUARTER WINDOW MOULDING LH

    1. Using a scraper, remove the moulding.

       Note:

       • Be careful not to damage the quarter window.

       • Be sure to replace the quarter window moulding with a new one.

30. REMOVE QUARTER WINDOW GLASS LH SPACER

    1. Using a scraper, remove the spacer.

       Note:

       • Be careful not to damage the quarter window.

       • Be sure to replace the quarter window spacer with new one.

31. CLEAN VEHICLE BODY

    1. 

       Clean and shape the contact surface of the vehicle body.

       1. On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

          Note:

          Be careful not to damage the vehicle body.

          Tip:

          Leave as much adhesive on the vehicle body as possible.

       2. Clean the contact surface of the vehicle body with cleaner.

          Table 4. Text in Illustration

          *1	Adhesive
          *2	Vehicle Body