ULTRASONIC SENSOR(for Front) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

   

   *1

   Keyhole

   Tip:

   Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.

   1. Align the keyhole and protrusion as shown in the illustration.

   2. Install the ultrasonic sensor retainer to the front bumper cover.

      Note:

      Do not damage the bumper cover with the protrusion when installing the retainer.

2. INSTALL NO. 1 ULTRASONIC SENSOR

   Tip:

   Use the same procedure to install the No. 1 ultrasonic sensor on the other side.

   1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

   2. Connect the connector.

3. INSTALL FRONT BUMPER COVER

   Click here

4. INSTALL RADIATOR GRILLE

   Click here

5. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click hereClick hereClick here

6. ADJUST FOG LIGHT AIMING

   1. Adjust fog light aiming (Click here).