UNDER BODY TWO-DIMENSIONAL DISTANCE

Tip:

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name
Symbol	Name	Hole Diameter mm (in.)
A, a	Radiator Cover Plate Standard Hole	φ10 (0.39)
B, b	Front Side Member Standard Hole	φ18 (0.71)
C, c	Front Suspension Crossmember Installation Nut	M14 (0.55)
D, d	Front Suspension Installation Hole	φ12.5 (0.49)
E, e	Front Suspension Crossmember Installation Nut	M14 (0.55)
F, f	Torque Front Box Standard Hole	φ25 (0.98)
G, g	Floor Side Member to Floor Pan Reinforcement Standard Hole	φ18 (0.71)
H, h	Front Side Inner Rear Member Standard Hole	φ18 (0.71)
J, j	Front Floor Under Reinforcement Standard Hole	φ15 (0.59)
K, k	Rear Floor Side Member Standard Hole	φ18 (0.71)
L, l	Trailing Arm Bracket Installation Nut	M12 (0.47)
M, m	Rear Shock Absorber Installation Nut	M10 (0.39)
N, n	Rear Suspension Crossmember Installation Nut	M16 (0.63)
O, o	Rear Suspension Crossmember Installation Nut	M16 (0.63)
P, p	Rear Floor Side Member Extension Standard Hole	φ10 (0.39)

Table 2. Wheel Base
Wheel Base	2640 mm (103.94 in.)

K138099C01

K138100C01