CLUTCH RELEASE CYLINDER(for 2WW) DISASSEMBLY

PROCEDURE

  1. REMOVE CLUTCH RELEASE CYLINDER KIT

    1. Remove the boot from the release cylinder body.

    2. Remove the push rod from the release cylinder body.

    3. C299393

      Using compressed air, remove the piston and spring from the release cylinder body.

      Note:

      Do not damage the inside of the release cylinder body.

  2. REMOVE RELEASE CYLINDER BLEEDER PLUG

    1. Remove the breeder plug cap from the release cylinder bleeder plug.

    2. C299392

      Remove the release cylinder bleeder plug from the release cylinder body.