REAR SEAT ASSEMBLY(for RH Side) INSTALLATION

PROCEDURE

  1. INSTALL SEAT LEG BRACKET

    1. Attach the guide.

    2. Attach the clamp and install the seat leg bracket with the 4 bolts.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

  2. INSTALL REAR SEAT ASSEMBLY RH

    1. Fully tilt the seatback forward.

    2. Place the rear seat assembly RH in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    3. Temporarily install the rear seat assembly RH with the 5 bolts.

    4. Lift up the seat track adjusting handle and move the seat to the foremost position.

    5. B336606C02

      *1

      Rubber Band

      Tighten the 3 bolts on the rear side of the seat.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Tip:

      Tighten the bolts in the order indicated in the illustration.

    6. w/ Seat Belt Warning System:

      Connect the 2 connectors.

    7. Attach the rubber band.

    8. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    9. B336603E01

      Tighten the 2 bolts on the front side of the seat.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Tip:

      Tighten the bolts in the order indicated in the illustration.

  3. INSTALL REAR SEAT NO. 2 LEG SIDE COVER

    1. Attach the 4 claws to install the rear seat No. 2 leg side cover.

  4. INSTALL REAR SEAT FRONT BRACKET COVER RH

    1. B336600

      Attach the 2 guides and 4 claws to install the rear seat front bracket cover RH in the direction shown by the arrow in the illustration.