UNDER BODY THREE-DIMENSIONAL DISTANCE
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
Symbol |
Name |
Hole Diameter mm (in.) |
|---|---|---|
A, a |
Radiator Cover Plate Standard Hole |
φ10 (0.39) |
B, b |
Front Side Member Standard Hole |
φ18 (0.71) |
C, c |
Front Suspension Crossmember Installation Nut |
M14 (0.55) |
D, d |
Front Suspension Crossmember Installation Nut |
M14 (0.55) |
E, e |
Torque Front Box Standard Hole |
φ25 (0.98) |
F, f |
Floor Side Member to Floor Pan Reinforcement Standard Hole |
φ18 (0.71) |
G, g |
Front Side Inner Rear Member Standard Hole |
φ18 (0.71) |
H, h |
Front Floor Under Reinforcement Standard Hole |
φ15 (0.59) |
J, j |
Rear Floor Side Member Standard Hole |
φ18 (0.71) |
K, k |
Trailing Arm Bracket Installation Nut |
M12 (0.47) |
L, l |
Rear Suspension Crossmember Installation Nut |
M16 (0.63) |
M, m |
Rear Suspension Crossmember Installation Nut |
M16 (0.63) |
N, n |
Rear Floor Side Member Extension Standard Hole |
φ10 (0.39) |
*A |
FRONT |
*B |
LH |
*C |
RH |
- |
- |
*a |
Distance between points other than those to the left |
*b |
mm (in.) |